SOYO SY-P4VDA Manuel d'utilisateur télécharger pdf (Page 13)

SY-P4VDA

Quick Start Guide

Quick BIOS

Setup

Quick BIOS Setup

This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead, CPU settings

are software configurable with the BIOS

[SOYO COMBO FEATURE].

The [SOYO COMBO

FEATURE] combines the main parameters that you need to configure, all in one menu, for a quick

setup in BIOS.

After the hardware installation is complete, turn the power switch on, then press the

<DEL>

key during the

system diagnostic checks to enter the Award BIOS Setup program. The CMOS SETUP UTILITY will be

shown on the screen. Then, follow these steps to configure the CPU settings.

Step 1.

Select [STANDARD CMOS FEATURE]

Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.

Step 2. Select [LOAD OPTIMIZED DEFAULTS]

Select the “LOAD OPTIMIZED DEFAULTS” menu and type “Y” at the prompt to load the BIOS optimal

setup.

Step 3.

Select [SOYO COMBO FEATURE]

Move the cursor to the

[CPU Frequency Select], [CPU Ratio]

field to set CPU Clock/Ratio.

Note:

Set the

[CPU Frequency Select]

field to “Manual”, to be able to change the CPU frequency 1

MHz stepping.

Step 4. Select [SAVE & EXIT SETUP]

Press

<Enter>

to save the new configuration to the CMOS memory, and continue the boot sequence.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Pas de commentaire

SOYO SY-P4VDA Manuel d'utilisateur Page 13